Kreamy Sauce liquid Diamond

Filling instructions 

1. The device comes with a battery/tank and a separate mouthpiece. Make sure to store the mouthpiece in a safe location while you are in the filling process.

2. Using a syringe, or other filling tools, fill the device by utilizing only one of the two outer filling holes. DO NOT FILL CENTER HOLE. Be careful not to ill both outer holes at once as one is required to let air escape during the illing process.

3. Push the mouthpiece back on the device until it clicks into place. Make sure to do this within 1 minute of filling the device.

AFTER FILLED

*Once the device is filled and the mouthpiece has been placed back on within 1 minute after filling, invert the device so that is upside down. This is to ensure the oil in the device cools away from the coil. This will help prevent any fracturing that might happen to the atomizer.

*After the device has been lipped upside down for 30 minutes, lip it right side up for another 30 minutes. This allows the oil to fully saturate the coil. If the coil is not fully saturat-ed, then it can potentially cause dry hits.

*when you have completed the inverting process, simply store the device in a room-tem-perature environment with the temperature being between 68-77 degrees F.

ADDITIONAL INFORMATION

*Available in 1.0 ml

*The needle,s outer diameter must be = 1.8mm.

*Do not pre-heat oil higher than 122 degrees F.

*The coil begins to absorb up to around 30% of the tank size of oil. The oilvolume will be visually reduce and headspace will be formed.